Calculated Industries 44060 CONSTRUCTION MASTER PRO DT Specifications download pdf (Page 112)

110

TEL: 1-800-645-4174 • Fax: 1-800-424-2082 • www.royalprod.com

PNEUVAC PUMP

Heavy Duty Construction — Entire pump (except ball valve,

float and O-ring) is made from either stainless steel or aluminum.

Other brands are made from rust-prone carbon steels and

light-duty plastics.

Very Safe — The PneuVac pump is powered by compressed air.

This eliminates the possibility of electric shocks often associated

with motor-driven pumps. An automatic shut-off valve activates

when the drum is full.

Fast — The Royal PneuVac pump can

fill a 55-gallon drum in just

90 seconds.

Conventional electric pumps can take up to one hour to

move the same amount of liquid.

Thorough — This pump not only removes liquid but will also pick

up sludge, metal chips and other debris which often clog or wear

out impeller-type pumps.

Quiet — Unique baffle system limits noise level without

compromising performance.

Low Maintenance — The PneuVac pump requires very little

maintenance because only compressed air flows through the pump

body itself.

Great Warranty — Royal Products provides a

3-year warranty

against failure of this product due to manufacturing defects.

The Royal PneuVac pump filled this 55-gallon drum with

coolant in less than two minutes.

Baffles:

For noise

reduction.

End Cap:

Specially designed

for minimum air

resistance.

Exhaust Housing:

Provides an air

expansion chamber and

directs exhaust air away

from operator.

1⁄4" Ball Valve:

Turns pump

on and off.

3 ⁄4 NPT:

World drum

standard.

Automatic

Shut-Off Valve:

Float rises with

liquid level to block

vacuum port as drum

becomes full.

Venturi:

Precision machined

to ensure optimum

air flow.

Body:

Stainless steel

construction for

long life.

Precision

Air Injector:

Ensures maximum

vacuum is generated

with minimum air

consumption (6.5 cfm

@ 100 psi).

ALL PARTS ARE

STAINLESS STEEL

OR ALUMINUM

except brass ball

valve, Delrin float

and Buna-N O-ring.

Clean Your Coolant Sumps

in Less Than Two Minutes

The Royal PneuVac pump is a simple device

that uses a compressed air-powered venturi

to create a vacuum. All you have to do to

operate the unit is: attach the pump and

hose to a standard 55-gallon drum, hook

up your compressed air supply to the pump,

insert the free end of the suction hose into

the sump or storage tank, and open the air

valve. The coolant and sludge is drawn

through the hose and deposited into the

drum — quick, clean, and hassle free!

Royal

PneuVac

Pump

Vacuum Hose

Waste

Liquid

Flow

Induced Vacuum

Waste Liquid

& Solids

Standard

55-Gallon

Drum

Exhaust

Air

Compressed

Air Input

Automatic

Shut-Off Valve

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 154 155

Comments to this Manuals

No comments

Calculated Industries 44060 CONSTRUCTION MASTER PRO DT Specifications Page 112

Comments to this Manuals

Related products and manuals for Water pumps Calculated Industries 44060 CONSTRUCTION MASTER PRO DT