Calculated-industries 4095-C Pocket Reference Guide User Manual download pdf (Page 15)

Pocket RefeRence Guide — 27

Note: ToreturntheWelder’sGaptothe

default1/8”,press toresetyour

calculatorbacktodefaultvalues.

Rolling Offset – Known Bend Angle

Find the center-to-center travel for a rolling

pipe offset with a 4” Roll and a 24” Offset.

KEYSTROKE DISPLAY

  ALL CLEArEd

1.EnterOffset:

2 4   OFST 24 INCH

2.Enterbendangle:

4 5  /

_

Ø 45.00º

3.EntertheRollandcalculatethepipelength:

4    (Roll) LNTH 34-7/16 INCH

Continuepressingthe keytoviewall

relatedvalues.

Rolling Offset – Unknown Bend Angle

Find the center-to-center travel for a rolling

pipe offset with a 6-1/2” Roll, a 17” Offset, and

an advance of 28”. The bend angle is unknown.

KEYSTROKE DISPLAY

  ALL CLEArEd

(cont'd)

1.SelectStainlessSteel:

  MATL S.StEEL

2.EnterPipeSize:

6   40 SIZE 6 INCH

3.Enter0forWelder'sGap:

   (Welder'sGap) GAP 0 INCH

4.EnterOffset:

1   

OFST 10 INCH

5.EnterRun:

1 2   RUN 12 INCH

6.Findthepipelength:

 TRAV 15-5/8 INCH

 CUT 9-1/8 INCH

 TO 3-1/4 INCH

 GAP 0 INCH

 FIT° 39.81°

 IARC 3-15/16 INCH

 CARC 6-1/4 INCH

 OARC 8-9/16 INCH

The cut length for the pipe is 9 and 1/8

inches and bend angle is 39.81°. Included

in the outputs are the arc lengths to be used

to cut your butt weld elbow to the calculated

bend angle. These are inner arc length of 3

and 15/16 inches, center arc length of 6 and

1/4 inches, and outer arc length of 8 and 9/16

inches.

(cont'd)

KEYSTROKE DISPLAY

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Comments to this Manuals

No comments