Calculated Industries Pipe Trades Pro User's Guide download pdf (Page 31)

32 — PiPe Trades Pro™

Simple Offset – Cut Length

Find the cut length (end-to-end) for a pipe offset with a 10”

Offset and a 12” Run. The bend angle is unknown. This example

assumes 6” Steel, factory made long radius butt weld elbows are

used. The following example shows an optional override of the

Welder’s Gap when working with Stainless Steel.

Note: All Take-Out calculations are based on Carbon Steel

O.D. See the Cut Length – Known Take-Out Value example

to solve Cut Lengths for known Take-Out values.

Unknown

Bend Angle

12˝ Run

10˝ Offset

Travel

KEYSTROKE DISPLAY

  ALL CLEArEd

1. Select Stainless Steel:

  MATL S.StEEL

2. Enter Pipe Size:

6   40 SIZE 6 INCH

3. Enter 0 for Welder's Gap:

   GAP 0 INCH

4. Enter Offset:

1    OFST 10 INCH

5. Enter Run:

1 2   RUN 12 INCH

6. Find the pipe length:

 TRAV 15-5/8 INCH

 CUT 9-1/8 INCH

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 64 65

No comments

Calculated Industries Pipe Trades Pro User's Guide Page 31