Calculated-industries 4095-A User Guide User Manual download pdf (Page 8)

6 — Pi P e Tr a d e s Pro™

 Accumulative Memory – Adds value to

Accumulative Memory.

 (M-) – Subtracts value from Accumulative Memory.

Dimensional Function Keys

 Feet – Enters or converts to feet as whole or

decimal numbers. Also used with  and  keys

for entering feet-inch values (e.g.,   

  ). Repeated presses during conversions toggle

between fractional feet-inch and decimal feet.

 Inch – Enters or converts to inches. Entry can be

whole or decimal numbers. Also used with  for

entering fractional inch values (e.g.,   

 ). Repeated presses during conversions toggle

between fractional and decimal inches.

 Fraction Bar – Used to enter fractions. Fractions

can be entered as proper (1/2, 1/8, 1/16) or

improper (3/2, 9/8). If the denominator (bottom) is

not entered, the calculator’s fractional accuracy

setting is automatically used. Results are always

shown in typical building fractional format.

 Identies/Converts to gallons per minute (GPM)

 Identies/Converts to liters per second (l/s)

 Identies/Converts to cubic feet per minute (CFM)

 Identies/Converts to cubic feet per second (CFS)

 Identies/Converts to ºC

 Identies/Converts to ºF

 Meters – Enters or converts to meters.

 Millimeters – Enters or converts to millimeters.

 Gallons – Enters or converts to gallons.

 Liters – Enters or converts to liters.

UG4095E-A.indd 6 5/5/2009 9:09:28 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 49 50

No comments

Calculated-industries 4095-A User Guide User Manual Page 8